Drywall Hangers for Builders and Contractors
Extreme Drywall offers drywall hanging in Central Florida for builders and contractors who need the board up fast and right. We hang drywall, often called Sheetrock, on wood studs, metal studs, furring strips and ceiling joists, then hand the job to your finishers with tight seams, clean cut-outs and a surface that is ready to tape. If you want the whole job done by one crew, see our drywall installation service.
A Good Hang Makes Every Coat Easier
Finishers can only work with what the hangers leave them. Gaps wider than a knife can bridge, butt joints landing on the same stud, and broken paper around screws all mean more mud, more sanding and more callbacks. We plan the sheet layout before the first cut, stagger joints between rows, keep butt joints off the middle of walls, and drive every screw to the right depth.
Measure, Cut and Fasten
-
Measure : We lay out each room to use the longest sheets that fit, choosing 4×12 or 54-inch board to cut down on seams on taller walls.
-
Cut : Sheets are cut to fit tight at corners and openings, with clean cut-outs for outlets, switches, vents and can lights.
-
Fasten : Ceilings go up first with a drywall lift, then walls top row first, fastened at the spacing the code requires and set just below the paper.
What Our Drywall Hanging Service Includes
-
Sheet layout and takeoff from plans
-
Stocking coordination with your board supplier
-
Hanging walls and ceilings on wood studs, metal studs and furring strips
-
Standard, moisture-resistant and 5/8-inch Type X board as specified
-
Cut-outs for electrical, HVAC and plumbing
-
Scrap cleanup so the finishers start on a clear floor
Hanging Work Your Finishers Will Notice
A clean hang shows in how fast the finishing goes. Tight joints take less compound, flush screws do not need a second pass, and straight corners take bead without fighting it. Builders who use their own tapers and finishers hire us because the board we hang saves their crew time on every room.
Drywall Hanging for Builders and Contractors Across Central Florida
Most of our hang-only work is for home builders, general contractors and remodeling contractors on new homes, multifamily units and commercial drywall projects. Once the board is up, we can also handle drywall taping and finishing if your schedule needs it. Browse all drywall services.